Marble Renew

Description

Instructions

Contents are by weight not volume. Bottle is approximately half filled with product in order to allow for easy mixing of paste and liquid. Stir product well with stick prior to using. Always test a small area first. Wear rubber gloves and make sure not to get paste on surrounding surfaces. For best results first clean area to be polished with any neutral marble stone cleaner.

Removes spots, stains, etching and fine scratches.

1. Working one area at a time no bigger than 6-8 inches, apply a small amount (about one teaspoon) of paste to dull area.
2. Using a white terry cloth, work the mixture in a circular motion. Add water as necessary to maintain a wet slurry.
3. Remove slurry with a clean cloth and check to see if polish is restored. Repeat if necessary.
4. Once the shine is achieved, clean area with a marble stone cleaner to neutralize.

Note

For deep etches and scratches professional stone restoration may be necessary.

Warning

Skin and eye irritant. Use rubber gloves and safety goggles. Keep out of reach of children and pets. If contact with eyes or skin, rinse thoroughly with water for five minutes. Seek medical attention if ingested.