Marble Sealer

Description

Surfaces for use

Granite, marble, travertine, limestone, tile, grout, concrete, masonry, and natural stone surfaces.

Coverage

200-400 sqft per pint. Coverage will vary based on the porosity and texture of the surfaces.

Results

Protection against oil and waterborne stains.

Product Features

• Safe for food preparation surfaces
• Non-toxic and Non-Flammable
• Solvent based Hybrid Carrier Technology for maximum penetration and protection of the surface
• Will not change color or appearance
• Protects against oil and water borne stains
• Leaves no greasy film or residue
• Suitable for interior or exterior use

Directions

Shake well before use.  For countertop application, use sealer applicator or microfiber cloth.

1. Make certain countertop is clean and dry.
2. Liberally apply an even coat to the surface.  Sealer should be spread evenly over surface to ensure proper penetration.
3. Allow sealer to penetrate the surface for 3-5 minutes.  Surface should remain wet for a minimum of 3 minutes.
4. After 3 minutes, examine the surface and reapply where sealer no longer appears on the surface.
5. After 5 minutes, wipe the surface dry and remove all excess sealer residue using a microfiber cloth.
6. Surface is suitable for use after 20 minutes.  Achieves full cure and repellency in 24-72 hours.

Limitations

Do not allow product to come into contact with any non-recommended surface. Sealer will not prevent surface from etching, scuffing and wear.

Cautions

Do not mix with any other chemicals. Do not dilute.

Person(s) testing for desired results and effect to determine suitability of this product performance, for any intended or unintended purpose shall be solely responsible for any unforeseen outcome related to this product.  Seller offers no warranties, expressed or implied, for any particular purpose(s) which extend beyond or within description and/or limitations pertaining to this product.  Product batch number on back of container.

Safety Preparations

1. Use only as directed.  Read entire label before use.
2. Test in an inconspicuous area with a 24-cure time to determine suitability.
3. Surface must be free of waxes and coatings.
4. Allow new grout installations to fully cure prior to application.
5. Surface temperature should be between 50 and 80 degree Fahrenheit.
6. Mask off and protect any surface not intended to be treated.
7. Apply in small, controllable areas.

Handling and Storage

Close container tightly after each use.  Store in original container only.  Store and use in temperatures between 50 and 80 degrees Fahrenheit.

First Aid

Skin: May cause irritation, wash with soap and water. Eyes: May cause irritation, flush with water for 15 minutes. Ingestion: May be harmful if swallowed, seek medical care.. Inhalation: Move to fresh air.